For better work
Dentled full-spectrum daylight LED lights create ideal working conditions for the dental practice. High-quality light is an important basis for the successful treatment of patients in a dental practice. In and of itself, natural daylight is the ideal light source for spatial orientation and focused, concentrated work. However, the structural conditions in practice rooms only allow sufficient daylight to enter through the window surfaces to a limited extent and in our latitudes only during the day. The lack of brightness for patient treatment has to be supplemented by artificial lighting.
The right luminance
The ratio of 10:1:0.5 can be used for optimal lighting at a dental workplace. This is the ratio between oral cavity illumination by a surgical lamp (20,000 lux for most dentist’s lamps, newer surgical LED lights often reach even higher values up to 55,000 lux), the direct vicinity of the mouth (2,000 lux) and the illuminance in the rest of the treatment room (800-1,000 lux).
Common complaints as a result of incorrect work field lighting: burning eyes, fatigue, concentration problems and unable to determine color properly. Investing in a quality light solution will for your workplace is essential for you and your team.
Testimonials
See what people are saying
“
Boca Sana Dental Clinics – former farmhouse and has been very professionally converted into a beautiful dental practice where, just like in Bunnik, Dentled full spectrum daylight has been chosen. Together with the owners Thomas de Leth and Peter Van der Eerden. – Read more
Thomas de Leth
Dentist, Owner BocaSana Clinics
“
Henry Schein installed the latest dental equipment in the new clinic. A full spectrum daylight LED solution was our which. Electro Rulfe provide the solution to Henry schein bij using DENLTED DL60.
Elektro Rufle for Zahnartz Murg Germany
Installer
“
“Thank you for the good advice and implementation. “It was a joy to work in the right light today”
– Mascha Koster Amsterdam.
DENTIST
How we work
1. Share your plan
Share your “floor”plan and we will create a lighting plan including dialux calculation with the right lighting for your or your clients clinic.
2. Sample and offer
Based on the offer we can ship you a sample for review.
3. Project and Delivery
Based on the agreed offer and installation date we finalise your order and deliver it for installation to your installer or office. We offer installation on request.
PH fixtures are available in two sizes 1405mm and 2245mm. long ( A dialux calculation report for your treatment rooms is included )
PHM14 mono: – 1x L1405/W51/H81mm
PHM22 mono: – 1 xL2245/W51/H81mm
PHL14 duo: – 2 x x L1405/W51/H81mm
PHL22 duo: – 2 x L2245/W51/H81mm
Dentled full-spectrum daylight LED lights create ideal working conditions for the dental practice
High-quality light is an important basis for the successful treatment of patients in a dental practice. In and of itself, natural daylight is the ideal light source for spatial orientation and focused, concentrated work. However, the structural conditions in practice rooms only allow sufficient daylight to enter through the window surfaces to a limited extent and in our latitudes only during the day. The lack of brightness for patient treatment has to be supplemented by artificial lighting.
PRODUCT SPECIFICATIONS
- 5200K
- 42-60W adjustable
- UGR<19
- Powerfactor 0.97
- CRi97
- Flicker Free Drivers ( Dali 2 )
- Pre mounted power cord
- 50.000 hours ( ref: L90B10*)
- Aluminium frame // high quality 1.5 cm
- Color: RAL9003
- DALI 2
- GST
50.000 hours ( ref: L90B10*) LB value indicate the real lifetime at a certain hours. Like L90B10 at 50,000 hours means the LED lamp keeping 90% lumen from initial lumen and only 10% light failed to reach 90% lumen. You can get clearly L70B50 means only 50% lamp survive at 70% lumen remaining at 50,000 hours.
Full Spectrum Daylight
You feel more comfortable in full spectrum daylight and has properties that cause less eye fatigue.
High RA 97+
Executed in a daylight color with an RA value of 97+ for optimal color determination.
2000 LUX
No negative influence on curing of composite and or glue thanks to the full spectrum daylight at 2000 lux
